SUNLU Silk PLA+ Filament 1.75mm vs SUNLU Silk 2.0 PLA 3D Printer Filament, 1KG: Which Silk Finish Fits Your Garage Prints?

SUNLU Silk PLA in Silver is a 1.75mm, 1KG specialty filament designed for creators who want decorative prints with a smooth, glossy shine right off the bed. It is a strong pick for vases, figurines, trophies, cosplay props and gift items where surface finish matters most.

In real world use, it feeds smoothly with clean detail when printed at 205 to 215C, 60 to 80C bed and 30 to 60mm/s. Users consistently praise the reflective silk effect that minimizes layer lines, plus reliable bed adhesion and clog free performance on Creality and other FDM printers.

Build quality is solid for the category, with tight plus or minus 0.02mm tolerance, neat machine winding to prevent tangles, and vacuum sealing with desiccant to keep moisture out. The standard 8 inch spool fits most FDM machines, and low shrinkage helps keep feeding consistent.

It is not perfect. Colors can look slightly different in person than in product photos, and silk PLA needs slower speeds and good cooling to keep that premium gloss. It is also best for display pieces, not load bearing functional parts where tougher PLA Plus, PETG or ABS would hold up better.

Verdict: For eye catching art and craft prints without polishing, SUNLU Silk Silver is an easy, reliable upgrade over basic PLA. If you print decor and want that smooth metallic sheen with dependable extrusion, this spool is well worth trying.

Brand: SUNLU, Material: Silk PLA, Diameter: 1.75mm with plus or minus 0.02mm tolerance, Weight: 1KG spool, about 330m, Color: Silver with glossy finish.

Recommended Settings: Nozzle 205 to 215C, Bed 60 to 80C, Speed 30 to 60mm/s with good part cooling for best shine.

Spool Size: 203.2mm diameter, 63.5mm width, 55.88mm hub hole, fits most FDM 3D printers. Vacuum sealed with desiccant for freshness.

Print slow at 30 to 60mm/s to preserve gloss and reduce stringing on silk PLA. Use a clean, level bed at 60 to 80C for strong first layer adhesion without warping.

Keep the filament dry and store in a sealed bag when not in use to maintain shine and prevent bubbles. If colors look dull, raise nozzle temp slightly and increase cooling for a smoother, more reflective finish.

The YUGMCOCE Silk Black PLA is a 1.75mm PLA based filament sold on a 1kg spool for most FDM 3D printers. It is aimed at hobbyists, crafters and makers who want decorative parts with a glossy, silk like look straight off the printer.

Its standout trait is the metallic glossy surface that adds depth to figurines, vases, angels and electronics enclosures. In real world use, users report smooth extrusion, vivid opaque black color and clean results when temperature and bed settings are dialed in.

Build quality is solid for the category, with CCD controlled diameter tolerance of +/-0.03mm and neat mechanical winding on a large core spool. The filament is dried for 24 hours then vacuum sealed with desiccant, which helps reduce bubbles, clogs and tangles during feeding.

Silk PLA is less forgiving than standard PLA, so layer lines and overhang flaws can be more visible and adhesion may need tuning. It is also moisture sensitive, so you will need airtight storage after opening to maintain that glossy finish and consistent flow.

Overall, this is a strong value pick for decorative printing where looks matter more than engineering strength. If you want eye catching black silk prints without polishing, YUGMCOCE is worth trying with a test print first to lock in settings.

Brand: YUGMCOCE

Material: Reinforced Silk PLA, 1.75mm diameter, +/-0.03mm tolerance

Spool Size: 1kg (2.2lbs) for most FDM 3D printers

Color and Finish: Silk Black PLA with metallic glossy finish, no polishing required

Packaging and Storage: Dried 24 hours and vacuum sealed with desiccant, store sealed after opening

MarsWork White Silk PLA is a 1.75mm, 1kg filament designed for creators who want a clean, glossy finish without extra post processing. It is a strong fit for Bambu Lab owners, beginners, and hobbyists printing decorative models, gifts, and display pieces.

Standout performance comes from its triple-dried, vacuum sealed preparation and Bambu Lab PLA Silk tuned profile. It feeds consistently for smooth extrusion and sharp detail, plus that signature chrome-like shine especially when outer walls are printed around 50 mm/s.

The Quick-Swap reusable spool feels practical and well thought out for real workspaces. You can press, lift, and change rolls in seconds, strap partial rolls for neat storage, and reuse the same spool to cut down on plastic waste.

As with most silk filaments, this is not the pick for high strength functional parts, and humid climates may still call for extra drying. Slowing outer walls for maximum gloss will also add some print time on larger models.

For easy, eye catching prints with minimal tuning, this is an excellent choice. If you want bright white shine, beginner friendly reliability, and tidy spool management, MarsWork Silk White delivers great value and polish.

Brand: MarsWork, Model: S1, Material: Silk PLA, Color: Silk White with spool.

Diameter: 1.75mm, Net Weight: 1kg (2.2 lbs), Compatibility: Bambu Lab 3D printers and most 1.75mm FDM printers.

Features: Triple-dried under 0.3 percent moisture, vacuum sealed with desiccant, reusable Quick-Swap spool system.

Safety Testing: Meets applicable EU food-contact migration limits, ASTM F963-23 limits for specified elements, and applicable phthalate limits with no VOC emissions detected in ISO 16000 testing.

SUNLU Silk 2.0 PLA in Silver is a 1.75mm decorative filament designed for makers who want eye catching display prints. It is a strong fit for hobbyists and artists printing vases, sculptures, figurines and cosplay props where appearance matters most.

The standout is the upgraded Silk 2.0 shine, which looks brighter and more refined than standard silk PLA. In real world use, it lays down smooth and glossy with rich reflections, and users report it prints much like regular PLA with good bed adhesion and minimal clogging.

Build quality is solid, with consistent diameter, neat winding and stable feeding for fewer tangles and jams. Each 1kg spool uses standard dimensions to fit most FDM printers and arrives vacuum sealed with desiccant to limit moisture issues.

There are tradeoffs to note. The improved layer adhesion adds strength but can make supports require extra care during removal. The glossy surface also shows layer lines more clearly, so it is less ideal for functional parts needing tight tolerances.

Overall, this is an excellent choice for decorative printing where shine and color matter. If you want polished, metallic looking models without extra finishing work, SUNLU Silk 2.0 in Silver is easy to recommend.

Material: Silk 2.0 PLA, Diameter: 1.75mm, Spool Weight: 1kg, Color: Silver, Finish: Silky glossy metallic look.

Nozzle Temperature: 205 to 235C, Bed Temperature: 50 to 60C, Print Speed: 50 to 200mm per second.

Spool Size: 200mm diameter by 67mm width with 55mm hub hole, designed to fit most FDM 3D printers.

This 1kg silver Silk PLA+ filament is made for makers who want eye catching, glossy prints without extra finishing work. It is a great fit for artists, hobbyists and anyone printing decorative pieces, figurines or display models.

Its standout feature is the chrome like satin finish that looks smooth and professional right off the printer. Users report consistent extrusion, strong layer adhesion and clean details with minimal stringing when printed at 30 to 60mm/s.

Build quality is solid thanks to high purity PLA+ material with tight plus or minus 0.02mm tolerance and low shrinkage. The spool comes neatly wound, vacuum sealed with desiccant, and uses a reusable spool design for reliable long prints.

There are a few tradeoffs to know. You will get the best shine at slower speeds and recommended 205 to 215C nozzle temps, which can extend print time, and the final color can look slightly different after printing.

Overall, this is a dependable and great looking silk filament for decorative printing. If you want vibrant shine, stable feeding and easy compatibility with popular printers, this silver option is easy to recommend.

The ERYONE Silk Silver PLA is a 1.75mm 1kg filament designed for makers who want glossy, decorative prints with a faux metal look. It is a great pick for hobbyists creating vases, statues, trophies, gifts and display models on most FDM printers.

Its standout trait is the smooth, pearlescent silk finish that hides layer lines and catches the light beautifully. Users report clean extrusion, minimal stringing and reliable results on machines like the Bambu Lab P1S and FLSUN Super Racer after dialing in 215 to 220C.

The filament is held to plus or minus 0.03mm tolerance for consistent flow and sharp detail. It arrives neatly wound and tangle free on a cardboard spool with length gauges, sealed in reusable vacuum packaging with desiccant.

Silk PLA is not meant for strong functional parts, as it trades some toughness for beauty and has lower heat resistance. The shine also looks a bit softer in person than in product photos, and large prints may need extra tuning for best color effect.

For decorative printing, this is a reliable and forgiving silk filament with excellent surface quality. If you want eye catching, gift ready prints without polishing, the Silk Silver is an easy recommendation.

Material: Polylactic Acid PLA in Silk Silver with silky smooth, high gloss finish and subtle layer lines.

Size: 1.75mm diameter with plus or minus 0.03mm accuracy, 1kg spool for long print jobs.

Compatibility: Works with 99 percent of FDM 3D printers and 3D pens, including AMS equipped models.

Packaging: Cardboard spool with filament gauge, vacuum sealed with desiccant for moisture protection.

Start around 215 to 220C nozzle temperature and adjust for your printer to get the best shine and lowest stringing. Silk filaments often print best a little hotter than standard PLA.

Use a clean, level bed for strong first layer adhesion and slower first layers on large decorative models. Good part cooling helps preserve gloss and detail on curves and overhangs.

Store the spool in the resealable bag with desiccant after use to keep the silky finish consistent. Choose multifaceted vases and statues to show off the light shifting effect.