You are choosing between Polymaker ABS Filament Black 1KG 1.75mm and iSANMATE ASA Filament 1.75mm Black 1KG for parts that will live in heat, sun and humidity, and you want a clear answer on PLA vs ABS for outdoor use. Both spools promise tougher functional prints than basic PLA, but they handle ultraviolet light, heat softening and warping very differently in a real garage.
If you print brackets, tool holders or outdoor enclosures, PLA vs ABS for outdoor use comes down to heat deflection, sun fading and layer strength over time, not just ease of printing. In this guide refreshed as of November 2026, we compare these two spools axis by axis so you can match the right material to your printer and where the part will live, with more background in our 3D printer filament guide.
This article contains affiliate links. If you buy through one of our links, TheGarageCrafted may earn a commission at no extra cost to you. Commissions never influence which products we recommend or how we rank them. Read our Affiliate Disclosure for details.
Quick Picks at a Glance

Prime Polymaker ABS Filament 1.75mm Black 1kg

Prime iSANMATE ASA Filament 1.75mm Black 1KG

Prime ELEGOO ASA 3D Printer Filament 1.75mm Deep Black
As an Amazon Associate we earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated.
Polymaker ABS Filament 1.75mm Black 1kg
Pros
- Excellent toughness and heat resistance for durable functional prints
- Stable, low volatile formula helps minimize jamming and print defects
- High dimensional accuracy for reliable fit and finish
- Thoughtful moisture free packaging with eco friendly recycled spool
- Clean matte black color great for professional looking parts
Cons
- Requires heated bed and preferably enclosed printer, not ideal for beginners
- Stronger odor than PLA, ventilation recommended during printing
- Large parts can warp without brim, raft and tuned settings, not UV rated for outdoor use
Polymaker ABS 1.75mm Black 1kg is a performance filament designed for functional 3D printing, not just looks. It suits makers, DIYers and engineers who need tough prototypes, replacement parts, jigs and housings that PLA cannot handle.
Standout performance comes from its 104C Vicat softening point and strong impact resistance for everyday mechanical stress. The bulk polymerized ABS formula lowers volatile content, which helps reduce jams, improve flow stability and deliver cleaner, stronger layers.
Build quality is excellent with tight plus or minus 0.03mm tolerance for reliable extrusion and dimensional accuracy. It ships vacuum sealed with desiccant in sturdy recycled packaging on a fully recycled cardboard spool that winds cleanly and resists tangling.
There are tradeoffs to consider, as ABS needs a heated bed and prints best in an enclosed, ventilated space. Large parts can still warp without a brim or raft, odor is stronger than PLA, and it is not the best pick for long term outdoor UV exposure.
Overall, Polymaker ABS is a smart upgrade for users ready to print real functional parts with professional strength and heat tolerance. With proper bed adhesion and ventilation, it rewards you with durable, matte black components that look and perform great.
Material: Acrylonitrile Butadiene Styrene ABS, Diameter: 1.75mm with plus or minus 0.03mm tolerance, Net Weight: 1kg on recycled cardboard spool.
Color: 111 Black with hex code #16161a, Vicat Softening Temperature: 104C, Compatibility: Most 1.75mm FDM 3D printers with heated bed.
Packaging: Vacuum sealed resealable bag with desiccant in sealed box, Model Number: PE01001, Best for indoor functional parts requiring toughness and heat resistance.
Always use a heated bed with clean PEI, glue or ABS slurry plus a brim or raft for larger prints. Keep first layer slow and ensure good adhesion to limit warping and corner lift.
Print in a well ventilated room or enclosed printer to manage odor and maintain stable ambient temperature. Store the spool sealed with desiccant and thread filament through the fixed hole after use to prevent tangles.
For outdoor or UV exposed parts, consider Polymaker ASA instead of ABS for longer color and strength retention.
Pros
- Excellent UV and weather resistance compared to standard PLA
- Strong mechanical and thermal stability for functional outdoor use
- Precise +/-0.02mm tolerance helps reduce clogs and improve print quality
- 1.75mm 1kg spool fits most popular FDM printers
- Vacuum sealed packaging with desiccant for freshness
Cons
- Requires high nozzle and bed temperatures plus an enclosed chamber for best results
- More prone to warping than PLA, bed glue and tuning are recommended
- ASA printing can produce odor, so good ventilation is needed
The iSANMATE ASA Filament 1.75mm Black 1KG is made for makers who need durable parts that live outdoors. It suits hobbyists, engineers and DIYers printing functional prototypes, replacement parts and enclosures.
Its standout strength is UV and weather resistance, which helps parts resist sun damage, fading and brittleness over time. Combined with good mechanical and thermal stability, it holds up far better than PLA in hot or exposed conditions.
In terms of quality, the filament is held to +/-0.02mm tolerance for even extrusion and dependable layer adhesion. The 1kg spool is vacuum sealed with desiccant to limit moisture, dust and print defects like stringing or bubbles.
It is not a plug and play material like PLA. You will need a printer that reaches 240 to 270C with an 80 to 100C heated bed, ideally enclosed, plus bed adhesive to control warping and ventilation for fumes.
Overall, this is a practical choice if you want affordable ASA for outdoor functional printing and have the right setup. For enclosed printers and users comfortable tuning temperatures, it delivers toughness and stability where PLA cannot.
Material: Acrylonitrile Styrene Acrylate (ASA), Diameter: 1.75mm, Net Weight: 1kg spool, Color: Black, Model: ASA-Black
Print Settings: Nozzle 240 to 270C, Bed 80 to 100C, Speed 30 to 100mm/s, Enclosed chamber and bed glue recommended
Compatibility: Most 1.75mm consumer and industrial FDM 3D printers, Packaging: Vacuum sealed with desiccant
Always print ASA in an enclosed printer or draft free room to reduce warping and layer splitting. Apply glue stick or ASA slurry to the bed for strong first layer adhesion.
Start around 250C nozzle and 90C bed, then fine tune for your machine and part size. Keep speeds in the 30 to 100mm/s range and avoid cooling fans or use very low fan.
Store the spool dry and reseal with desiccant after use, and ventilate the room during printing for comfort.
Pros
- Superior UV and weather resistance for long lasting outdoor parts
- High heat deflection of 99C plus excellent water resistance
- Tough impact resistant formula for functional and mechanical use
- Consistent extrusion and layer adhesion for reliable enclosed printing
- Vacuum sealed packaging preserves dryness and print quality
Cons
- Requires an enclosed printer for minimal warping and best layer adhesion
- Needs higher printing temperatures and ventilation compared to PLA or PETG
- Overkill for basic indoor decorative prints where easier filaments would do
The ELEGOO ASA Filament in Deep Black is a 1.75mm, 1KG engineering spool made for functional FDM printing. It is aimed at hobbyists, makers and engineers who need parts that live outdoors or inside hot environments.
Its standout strength is long term outdoor stability, with ASA chemistry that resists UV, rain and yellowing far better than ABS. Combined with heat deflection up to 99C and solid water resistance, it holds dimensions and toughness for automotive parts, drone frames and outdoor fixtures.
ELEGOO focuses on print consistency with stable extrusion, even diameter and strong interlayer adhesion. The Deep Black color offers a clean, professional finish for end use parts, and each spool arrives dried and vacuum sealed with desiccant to reduce stringing and bubbles.
As with all ASA, it is more demanding than PLA or PETG and performs best in an enclosed printer with proper temps and ventilation. Beginners with open frame machines may see warping or odor issues without tuning and airflow control.
Overall, this is a purpose built filament for durable, weatherproof functional prints rather than casual models. If you run an enclosed printer and need tough outdoor ready parts, it is a practical and reliable choice.
Brand: ELEGOO, Material: Acrylonitrile Styrene Acrylate (ASA), Diameter: 1.75mm, Net Weight: 1KG, Color: Deep Black.
Heat Deflection Temperature: Up to 99C / 210F, Compatibility: FDM 3D printers, enclosed models recommended for best results.
Key Properties: UV and weather resistant, heat and water resistant, high strength and impact resistant, vacuum sealed with desiccant.
For best results, print in an enclosed printer to control chamber heat and minimize warping. Use a heated bed and follow ASA temperature profiles for strong layer bonding.
Ensure good ventilation during printing and keep the spool dry between uses for clean extrusion. Store in a sealed bag with desiccant when not in use to preserve quality.
Head-to-Head
Heat Tolerance and Strength When the Garage Gets Hot
Polymaker ABS Filament Black 1KG 1.75mm lists a Vicat softening temperature of 104C and calls out strong mechanical properties for functional parts that need durability under higher heat, which is a clear step above standard PLA for warm garages and car interiors. iSANMATE ASA Filament 1.75mm Black 1KG also emphasizes mechanical and thermal resistance for stability across changing temperature environments, so both are positioned for load bearing brackets, mounts and enclosures rather than decorative models.
For you, that means Polymaker ABS Filament Black 1KG 1.75mm and iSANMATE ASA Filament 1.75mm Black 1KG will both hold shape longer than PLA near a sun warmed door, attic storage or engine bay shelf, where PLA can soften and creep. If your garage swings from cold nights to hot afternoons, that added heat margin matters as much as raw strength, a theme we also see with cold garage cracking in other storage materials.
UV and Weather Resistance in Sun and Rain
This is the biggest split for PLA vs ABS for outdoor use, because Polymaker ABS Filament Black 1KG 1.75mm is made from specialty bulk polymerized ABS resin with lower volatile content, yet the maker notes that for outdoor applications requiring UV resistance you should consider their UV resistant ASA filament. iSANMATE ASA Filament 1.75mm Black 1KG is built around that exact need, with claims of excellent UV, weather, mechanical and thermal resistance plus protection against breakage and color degradation during long outdoor exposure.
When you compare them side by side, Polymaker ABS Filament Black 1KG 1.75mm gives you impact and heat resistance for covered or indoor garage use, while iSANMATE ASA Filament 1.75mm Black 1KG is the more purpose built choice for mailbox numbers, fence hooks, garden tool mounts and shed latches that face direct sun and rain. Owners commonly report that standard ABS can fade, yellow and become more brittle after months outside, while ASA holds color and toughness longer in the same spot.
Printing Difficulty, Warping and Enclosure Needs
Neither spool prints as easily as PLA, and both makers are direct about that trade off for PLA vs ABS for outdoor use. Polymaker ABS Filament Black 1KG 1.75mm requires a heated bed and suitable surface to prevent warping, warns that larger parts are more prone to warping on home printers, notes stronger odor than PLA, and suggests a raft or brim plus a slower first layer to improve adhesion. iSANMATE ASA Filament 1.75mm Black 1KG lists a 240C to 270C nozzle range, 30 to 100mm per second speed range and an 80C to 100C bed, recommends a closed chamber and glue on the bed, and stresses stable conditions for best layer bonding.
For your garage shop, plan on an enclosed printer or at least a draft free enclosure, good ventilation and patience with first layer tuning if you choose either Polymaker ABS Filament Black 1KG 1.75mm or iSANMATE ASA Filament 1.75mm Black 1KG. If you already print ABS with a heated bed and brim, the workflow will feel familiar, but if you only print PLA in the open air, expect more prep and a learning curve before you get flat, strong outdoor parts.
Dimensional Consistency and Moisture Handling
iSANMATE ASA Filament 1.75mm Black 1KG advertises dimensional accuracy of plus or minus 0.02mm and vacuum sealed packaging with desiccant to block dust and moisture, which helps with smooth feeding and consistent extrusion on long prints. Polymaker ABS Filament Black 1KG 1.75mm counters with vacuum sealed resealable packaging plus desiccant in a sturdy sealed box, a fully recycled cardboard spool in upgraded packaging, and a fixed hole to thread the end through after use to avoid tangles.
You will still want dry storage for either spool, because damp garage air can cause stringing, popping and weak layers in both ABS and ASA materials. Keep Polymaker ABS Filament Black 1KG 1.75mm and iSANMATE ASA Filament 1.75mm Black 1KG sealed with desiccant when not in use, consider a dry box for long jobs, and organize spools and accessories with the same care you give to clear storage bins in 8ft ceiling systems to avoid moisture and clutter.
Which One Should You Get
Choose Polymaker ABS Filament Black 1KG 1.75mm if your parts will live mostly inside the garage, workshop or vehicle interior where heat and impact matter more than direct sun, and you want a well documented ABS with 104C Vicat performance and minimized jamming. You are a good fit if you already have a heated bed, ventilation and experience with brims or rafts, and you print medium size functional brackets, jigs, tool holders and replacement knobs that need toughness without paying for full weatherproof chemistry.
Choose iSANMATE ASA Filament 1.75mm Black 1KG if your project centers on PLA vs ABS for outdoor use in full sun, rain and seasonal swings, such as address plaques, outdoor camera mounts, shed door guides, planter brackets or trailer accessories. You are a good fit if you can print at 240C to 270C with an 80C to 100C bed in a closed environment, you value long term color stability and breakage resistance outdoors, and you want plus or minus 0.02mm consistency for parts that must fit together after months outside. As another option worth a look, ELEGOO ASA 3D Printer Filament 1.75mm Deep Black offers similar UV focused specs if you need a backup spool.
Who Should Skip Both
If you print in a small shared garage with no enclosure, no ventilation and no heated bed experience, both spools are not ideal for your setup right now because warping, odor and higher temperatures will frustrate you compared with PLA or PETG. Beginners, renters who cannot vent fumes, and anyone printing toys, desk organizers or garage cabinets for 2 car garage labels that stay indoors should start with an easier material and revisit ABS or ASA after upgrading the printer space.
Frequently Asked Questions
Is ABS actually better than PLA for PLA vs ABS for outdoor use?
Yes for heat and impact, but with limits for sun exposure. Polymaker ABS Filament Black 1KG 1.75mm handles higher temperatures and functional loads better than basic PLA, yet for long term UV exposure the brand itself points users toward ASA instead of standard ABS.
Do I need an enclosed printer for ABS or ASA in a garage?
An enclosure is strongly recommended for both Polymaker ABS Filament Black 1KG 1.75mm and iSANMATE ASA Filament 1.75mm Black 1KG to reduce warping and improve layer adhesion. You will also want a heated bed, glue or proper surface prep, and ventilation because odor is stronger than with PLA.
Will ABS fade or get brittle outside compared to ASA?
Standard ABS can fade, discolor and lose toughness after prolonged sun and moisture, while ASA is formulated to resist those changes. That is why iSANMATE ASA Filament 1.75mm Black 1KG highlights UV and weather resistance and color stability, making it the safer pick for parts that stay outside year round. See our garage cabinets and lockers ideas for storing finished prints and spare spools away from sun when not in use.
Write Your Review
No reviews yet. Be the first to share your experience!